Products and Component Restoration

Home » Reproduction Parts & Specialty Coatings » All Products Avoid Menacing Metal Oxidation Details  AMMO (Avoid Menacing Metal Oxidation) is a unique, patented protectant which binds with metal to provide a durable, abrasion resistant, and low molecular surface tension environment. AMMO will not harm or alter the finish of the part it is used on. AMMO is impervious to: SALT ACIDS OXIDATION OILS RUST CORROSIVES In independent lab tests, AMMO was impervious to salt fog, acid spray, abrasives, and thermal shock. Environmentally safe and non-toxic, AMMO outperforms and outlasts all others, including bio-based and food grade compounds. AMMO provides a long lasting corrosive barrier on all metal components. There is nothing else like it. This product works excellent on zinc plating, polished parts, aluminum and even rubber hoses. Buffs off clean without leaving a powder or any visible residue. ECS AMMO Sold in a 4oz. tub for $24.95 Price: $24.95 Black Paper Tape - 2" Details  Black paper tape (2" wide) as used to tape down the plastic vapor barrier sheet behind doors and quarter interior panels. 60-yard roll. Price: $14.00 1 of 2 Bulkhead Terminal Female Details  Electrical terminal as used in the firewall bulkhead and various plugs. 14-16ga. wire size. Price: $0.50 1 of 2 Bulkhead Terminal Male Details  Electrical terminal as used in the firewall bulkhead and various plugs. 14-16ga. or 10-12ga. wire size. Select with drop down menu below. Product Selection Please Select...10-12 ga. male 14-16 ga. male Price: $0.50 Cosmoline Aerosol Details  Aerosol spray can of Cosmoline rust inhibitor coating as used on Mopar lower control arms. Dries to a paraffin wax-like coating. Also an excellent corrosion inhibitor for coating inner panels such as door skins. THIS PRODUCT CAN ONLY BE SHIPPED TO THE CONTINENTAL USA. Price: $14.00 1 of 2 Factory Texture Undercoating Details  Rick's exclusive formula undercoating is a rubberized product with texture additives that will give exceptional recreation of original undercoating texture and thickness. This undercoating is a rubberized product with texture additives that will give exceptional recreation of original undercoating texture and thickness. This coating is the same formulation used by Rick on his award winning restorations. It can also be used for coating the inside areas of quarter panels and painted over. Comes with detailed instructions for application to achieve original appearing results. Can be applied with a standard "Shutz" type undercoating gun. Thinning is not recommended as it will flow out too smooth. Sold by the gallon only. Typical quantity required: 1 gallon to do the front & rear wheel wells. One to two quarts to do the quarter panels inside. An additional 2 gallons to do the underbelly. Pricing-$113 per gallon. THIS PRODUCT CAN ONLY BE SHIPPED TO THE CONTINENTAL USA. Price: $113.00   K-member Oval ID Coin   Faithful reproduction of the oval shaped ID coin welded to the front of 1970 K-members starting mid-year. Price includes stamping with numbers for your application. Number is the last two digits of the part no. 52 #3583052 '70 E-body K-Frame 318, 340, 340 T/A & AAR, & 383 LATE 74 #3583074 '70 E-body K-Frame 383 & 440 w/ LATE Skid 76 #3583076 '70 E-body K-Frame 426 Hemi LATE w/ Skid 77 #3466477 '70 E-body K-Frame 318, 383 LATE 90 #2962090 '70 B-body K-Frame 318, 383 94 #2962094 '70 B-body 426 Hemi w/Skid 79 #3466479 '70 B-body 440 w/Skid 64 #3583064 '70 A-body 318, 340 LATE 12 #2960212 '70 E-body 318, 340, 383 EARLY 14 #2962014 '70 E-body K-Frame 426 Hemi EARLY w/ Skid 77 #3466477 '70 E-body K-Frame 440 EARLY w/Skid Price: $29.00 Keystone Fuel Hose Clamps Details  Correct zinc plated color coded keystone type fuel hose clamps available in 1/4", 5/16 & 3/8" sizes. 1/4"= zinc dichromate, 5/16"= clear zinc, 3/8"= black zinc. *Note: The price shown will be automatically adjusted as necessary when you select your clamp size. Type Price Adj Please Select...1/4" zinc dichromate (+$0.70) 5/16" clear zinc 3/8" black zinc (+$0.70) Price: $1.25 Large Flange Rivet Details  Special steel large flange pop rivet as used on front frame rail splash shields and 69 Roadrunner & Superbee air grabber hood air induction ductwork. Also available in aluminum as used on Superbird and Daytona nose areas. Type Price Adj Please Select...Aluminum Steel Price: $0.50 Mirror Threaded Insert Details  10-24 threaded steel insert as used to fasten door mirror and rear window louvers. Requires use of a threaded insert installation tool. A low-buck alternative is to use a 10-24 hex headed screw with a flat washer and a hex nut. The screw is threaded into the insert with the hex nut threaded on the screw. While holding the screw to prevent it from turning, the hex nut is tightened to compress the threaded insert. The insert must be held tightly to the sheetmetal as the nut is tightened. Price: $1.00 Power Steering Hose Clamp Details  Power steering hose clamp for low pressure side. Correct red phosphate coating. Fits many applications. Price: $0.75 Push Retainer Details  Push retainer as used on A-body hood hinges (4 required) and E-body trunk hinges (2 required). Price is each. Price: $1.00 Quasimoline Paint Details  Urethane paint formulated to closely mimic the original cosmoline finish used on Mopar lower control arms. This is an ideal product for those wanting a durable finish that can be wiped clean and not hold dirt like the real thing. Dries to a satin gloss. Darkness & coloring will vary with number of coats applied and color of control arm coating. Thin with a urethane reducer, no hardener required. Sold in a half pint can for use with a touch-up style spray gun. One can will do one pair of control arms. THIS PRODUCT CAN ONLY BE SHIPPED TO THE CONTINENTAL USA. Price: $45.00 1 of 3 Trim Panel Clip Flat Style Details  Interior trim panel flat style clip. Price: $1.00 1 of 3 Urethane Gray Jack Paint Details  Do it right with durable high quality acrylic urethane paint! 1/2 pint sprayable correct light gray color for Mopar bumper jack parts. Flows beautifully and dries with a nice gloss. I recommend spraying it with a touch-up gun. Price: $41.00 « Previous123Next »