Products and Component Restoration

Home » Reproduction Parts & Specialty Coatings » All Products Checkout 1966-67 B-body Dash Knob Inserts Details  Set of 6 chrome dash knob inserts designed to fit your 1966-67 B-body. Beautiful reproduction ! Extra knob inserts are available for cars with more than 6 knobs for $12.00 each. Now only $49/set! Price: $49.00 Add to cart PREV 1 of 2 NEXT 1966-70 B-Body Pinion Snubber Plate Details  Accurate reproduction of plate used on Hemi cars to reinforce the floor area directly above the pinion snubber. Designed to fit 1966-70 B-body. Fabricated in the USA using the correct gauge steel. Can also be added for extra strength on high performance cars. Priced at $85. Price: $59.00 Add to cart 1966-70 B-body Rear Spring Reinforcements Details  Reinforcement plates as used on Hemi powered '66-70 B-body on the rear frame rail area by the shackles. Designed to fit '66-70 B-body Mopar. Price is $80/pair to do one car. Price: $40.00 Add to cart PREV 1 of 2 NEXT 1966-70 B-Body Spring Hanger Reinforcement Plates Details  Accurate, high quality reproduction Spring Hanger Reinforcement Plate Set to fit 1966-70 B-body Mopars. A faithful reproduction of the spring hanger plates originally installed on convertible and Hemi cars to strengthen the spring hanger mounting areas. These are also an excellent addition to high performance cars subject to "spirited" driving! Fabricated in the USA from the original gauge steel with correct contours and holes for the discriminating restorer. Priced at $70 for the set of 4 plates. Price: $70.00 Add to cart PREV 1 of 2 NEXT 1966-70 B-body Torque Boxes Details  Accurate torque boxes designed to fit 1966-70 B-body. Correct gauge & contours. These are the most accurate reproduction torque boxes on the market ! Price at $296 for front set only, $346 for rear set only and $581 for full set of front & rears. FRONTS & REARS IN STOCK 6-23-26 Quantity Select Please Select...$296 for Front Pair Only $346 for Rear Pair Only (+$50.00) $581 for Front & Rear Set (+$285.00) Price: $296.00 Add to cart PREV 1 of 2 NEXT 1967-76 A-body Torque Boxes Details  Super accurate, die stamped reproduction in the correct gauge steel designed to fit your 1967-76 A-body Mopar! Priced at $256 for fronts only, $286 for rears only, $511 for set of four. FRONTS & REARS IN STOCK READY TO SHIP!! 7/1/26 Quantity Select Please Select...$256 for Front pair only $286 for Rear pair only (+$30.00) $511 for Front and Rear Set (+$255.00) Price: $256.00 Add to cart 1969-70 B-body N96 Hood Hinge Spring Details  Accurate reproduction of the special heavier hood hinge springs used on N96 Air Grabber hood optioned 1969-70 B-body Mopars. Exact wire gauge, coil count & outside diameter. Price is for one pair of springs. Price: $75.00 Add to cart PREV 1 of 3 NEXT 1970-71 E-Body Pinion Snubber Plate Details  Accurate reproduction of plate used on Hemi cars to reinforce the floor area directly above the pinion snubber. Designed to fit 1970-74 E-body. Fabricated in the USA using the correct gauge steel. Can also be added for extra strength on high performance cars. Priced at $59. Price: $59.00 Add to cart PREV 1 of 2 NEXT 1970-74 E-body Spring Hanger Reinforcement Plates Details  Accurate, high quality reproduction Spring Hanger Reinforcement Plate Set to fit 1970-74 E-body Mopars. A faithful reproduction of the spring hanger plates originally installed on convertible and Hemi cars to strengthen the spring hanger mounting areas These are also an excellent addition to high performance cars subject to "spirited" driving! Fabricated in the USA from the original gauge steel with the correct contours and holes for the discriminating restorer. Priced at $50 for the set of 4 plates. Price: $50.00 Add to cart PREV 1 of 2 NEXT 1970-74 Ebody Torque Boxes Details  Accurate, correct gauge torque boxes designed to fit your E-body Mopar as used on Hemi equipped, AAR Cuda, Challenger T/A and convertible cars. An excellent improvement in strength for high performance cars as well. PLEASE NOTE: Front torque boxes for '73-74 cars will usually need to be modified slightly to compensate for a difference in the inner rocker panel angle. $215 for front set only, $255 for rear set only, $411 for full front & rear set. FRONTS & REARS IN STOCK 6-23-26. Quantity Select Please Select...$215 for Front Pair Only $255 for Rear Pair Only (+$40.00) $411 for Front & Rear Set (+$196.00) Price: $215.00 Add to cart 1971-72 B-body N96 Hood Hinge Spring Details  Accurate reproduction of the special heavier hood hinge springs used on N96 Air Grabber hood optioned 1971-72 B-body Mopars. Exact wire gauge, coil count & outside diameter. Price is for one pair of springs. Price: $75.00 Add to cart 1971-74 B-body Rear Torque Boxes Details  Accurate die stamped rear torque boxes designed to fit 1971-74 B-body. Correct gauge & contours. 1971-72 B-body Fronts are available here- http://www.n96airgrabber.com/proddetail.asp?prod=FTB-001 Priced at $410 per pair. IN STOCK 6-23-26 Price: $410.00 Add to cart PREV 1 of 3 NEXT 6-way Seat Brackets Details  Nice accurate reproduction of E-body 6-way seat brackets. Stud mounting plates & 2 thick spacer washers are included. Stud mounting plates, correct steel material spacer washers and under floor braces are available separately as well. Use drop-down menu to select desired items for purchase. Complete Kit is $381 Separate Parts: Under floor braces $319; Threaded stud plates $51; Thick spacer washers $22/pr. IN STOCK READY TO SHIP! Product Options Please Select...$22 for Spacers Only $51 for Mounting Straps Only (+$29.00) $319 Underside Braces Only (+$297.00) $359 for Complete Kit (Spacers, Straps, Braces) (+$337.00) Price: $22.00 Add to cart Air Cleaner Seal Tape Details  8" length of tape as used originally on fresh air cleaner to hood seal joint. This tape is correct width, color, texture and composition. See details for a picture of tape installed on an air cleaner. Price: $3.00 Add to cart PREV 1 of 5 NEXT Automatic Pistol Grip Shifter Handle Details  Automatic Pistol Grip Shifter Handle. Artfully crafted stainless steel pistol grip style handle designed to mount on the factory automatic shifter. Grips are factory style plastic. This is what Chrysler should've installed! The button function is replaced by moving the shift handle downward. This shifter handle is the only one on the market with the tilt forward look of a 4-speed shifter. Select your application from the drop-down menu. Designed to fit 1970 & 74 E-body (round stalk), 1971-73 E-body (rectangular stalk), 1971-73 B-body (rectangular stalk), 1966-70 B-body, 1967-76 A-body. If ordering for E-body (Challenger or Barracuda) PLEASE NOTE: CHECK YOUR SHIFTER TO BE SURE OF THE STALK SHAPE. IT'S NOT UNCOMMON FOR THEM TO HAVE BEEN CHANGED. Priced at $429 ea. 70E IN STOCK. 71-73E & earlyB/A OUT OF STOCK 7/1/26 Application Selection Please Select...70 E-body 71-74 E/B-body 1966-70 B-body A-body Price: $429.00 Add to cart « Previous123Next »