Restorations by Rick Kreuziger
Restorations by Rick Kreuziger
Home | Profile | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
 All Forums
 General
 Hardware
 Installing new Headlight Adjusters
 New Topic  Reply to Topic
 Printer Friendly
Author  Topic   

Rick

78 Posts

Posted - 03/23/2006 :  00:42:57  Show Profile  Reply with Quote
These can be a pain!!!

Here's how they are supplied:
Never mind the dirty dry hand!


First step is to disassemble:


Next, press the metal sleeve onto the plastic block:


Now using a small hammer (nylon faced one is best),
tap the assembled nylon block into the cutout hole on the fender.
A sharp deliberate blow works well. When correctly installed the block will be all the way in.


Finished installation:


Rick Kreuziger
   Topic   
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Restorations by Rick Kreuziger © 2000-04 Snitz Communications Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.04