Restorations by Rick Kreuziger
Restorations by Rick Kreuziger
Home | Profile | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
 All Forums
 General
 Assembly Line Errors & Deviations
 Shaker Cable Firewall Hole
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Rick

78 Posts

Posted - 06/08/2004 :  22:09:09  Show Profile  Reply with Quote
This first picture is of the dimple next to the shaker cable firewall hole that was incorrectly drilled. The hole then had a patch of sheetmetal tack brazed over the hole. Factory paint covered the "repair". Inside the firewall a rust trail formed from water getting into the car! (1971 'Cuda)
Rick



This next picture shows the dimple next to the shaker cable firewall hole that was pilot drilled. (1971 'Cuda)
Rick

  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Restorations by Rick Kreuziger © 2000-04 Snitz Communications Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.04