Restorations by Rick Kreuziger
Restorations by Rick Kreuziger
Home | Profile | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
 All Forums
 General
 Assembly Line Errors & Deviations
 Spring Hanger reinforcement plate
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic   

Rick

78 Posts

Posted - 06/05/2004 :  13:36:00  Show Profile  Reply with Quote
Here's a spring hanger reinforcement plate found on a 1970 Challenger convertible. The plate was welded in upside down. Because the hole spacing is different from the top to bottom the holes had to be "egged" out to allow the spring hanger installation.
Rick Kreuziger

  Previous Topic Topic   
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Restorations by Rick Kreuziger © 2000-04 Snitz Communications Go To Top Of Page
Powered By: Snitz Forums 2000 Version 3.4.04