Note: You must be registered in order to post a reply.
T O P I C R E V I E W
Posted - 06/08/2004 : 22:09:09 This first picture is of the dimple next to the shaker cable firewall hole that was incorrectly drilled. The hole then had a patch of sheetmetal tack brazed over the hole. Factory paint covered the "repair". Inside the firewall a rust trail formed from water getting into the car! (1971 'Cuda) Rick
This next picture shows the dimple next to the shaker cable firewall hole that was pilot drilled. (1971 'Cuda) Rick