Products and Component Restoration

Home » All Products

 Checkout

Rallye Mirror Screw
Rallye Mirror Screw

Details 

Oval head phillips screw with the correct head shape and diameter as used for Rallye mirror installation.

Correct chrome plated finish. (Not polished stainless steel like other incorrect reproductions!)

Price: $1.00
Add to cart

Rear End Axle Gaskets
Rear End Axle Gaskets

Details 

Correct white poly material gaskets for the rear end axle bearing flange to backing plate. These gaskets will fit both 8 3/4" & Dana 60 rear ends.

Price is for one pair of gaskets.

Price: $3.00
Add to cart

Rear Lower Shock Washer Set
Rear Lower Shock Washer Set

Details 

Rear lower shock washer set for most muscle car era Mopars. Washers are correct shape, thickness & natural steel color.

Price is for one set of washers for one car.

Price: $36.00
Add to cart

Roof Rail Channel Seal Kit
Previous1 of 5Next
Roof Rail Channel Seal Kit

Details 

Kit comes with the appropriate foam tape material used to seal the roofrail weatherstrip C-channel to the body as used on A, B, and E-body cars. These gaskets are manufactured by Detroit Muscle Technologies.

One kit will do one car.

Use the drop down menu to select your application.

:
Price: $10.00
Add to cart

Rust Prevention Magic
Rust Prevention Magic

Details 

A revolutionary new product for preserving your restoration's bare metal components! A patented blend of the finest polymers for exceptional moisture resistance. The metal's natural appearance is unchanged and details such as heat marks & draw marks are not altered.

RPM will not remove rust! All traces of corrosion must be removed before applying for best results.

Applied by warming the part to approximately 120 degrees with a heat gun or hair dryer and brushing RPM on with the supplied brush. RPM will liquify on contact and cool down to an invisible film. Excess may be buffed with a cloth.

Sold in an 8oz. tub and includes instructions and an application brush.

Price: $34.95
Add to cart

Seat Nuts
Seat Nuts

Details 

Correct zinc dichromate plated toothed style captive washer nut as used for most Chrysler car seat mounting. These have the correct 1" diameter washer.

Price is each.

Price: $2.00
Add to cart

Seat Track Stud
Previous1 of 2Next
Seat Track Stud

Details 

Seat track stud. Also used for battery terminal head. Black oxide finish with square shoulder. 1 7/16" length from under the head to tip.
Price: $3.00
Add to cart

Steel Wheel Date Coding Service
Steel Wheel Date Coding Service

Details 

Service consists of welding closed and sanding flat the undesired date code, and stamping new date codes with the correct size characters. Repairs such as valve stem hole damage, lug hole repairs, and rim damage are available at additional cost. 29444450 stamping available.

Pricing (per wheel):

$25- weld closed, grind & stamp numbers. (can be less depending on number of changes, etc.)

$15- stamp "H"

$8- add bumps on outer hoop by valve stem hole.

$30- add '69 H-wheel dimples.

Turnaround time is typically under a week.

Contact for exact price with return shipping and for shipping address.
Phone: 608-697-0994 email: rick@restorick.com

Price: $25.00
Add to cart

Taillight Stud Covers
Taillight Stud Covers

Details 

Red taillight housing stud covers as used on 1969 Plymouth A-body & B-body, 1970-71 Plymouth E-body. $10.00/set of 8
Price: $8.00
Add to cart

Throttle Springs
Throttle Springs

Details 

Manufactured with original coil count, wire diameter & dimensions. Finished with the dyechem coloring process as used on the original springs. This coating process gives color coverage on the outside & inside of the spring unlike spray painted application used on some other reproductions.
:
Price: $5.00
Add to cart

Trim Panel Clip Flat Style
Previous1 of 3Next
Trim Panel Clip Flat Style

Details 

Interior trim panel flat style clip.
Price: $1.00
Add to cart

Under Dash Shoddy Pad
Previous1 of 4Next
Under Dash Shoddy Pad

Details 

Under dash insulation/sound deadener pad made from correct appearing material and cut in exact shape as original.

Available for 1970-74 E-body, 1966-70 B-body, 1971-74 B-body, 1967-76 A-body cars. Select body type from drop down menu.

Manufactured by Detroit Muscle Technologies

:
Price: $24.00
Add to cart

Up Stop A, B & E-bodies
Previous1 of 4Next
Up Stop A, B & E-bodies

Details 

Plastic window up stop post for A, B & E-bodies.
Price: $6.00
Add to cart

Up Stop B & J Body
Previous1 of 3Next
Up Stop B & J Body

Details 

Plastic window up stop post for B & J bodies.
Price: $7.50
Add to cart

Urethane Mopar Dip Primer
Previous1 of 5Next
Urethane Mopar Dip Primer

Details 

Special single stage Acrylic Urethane mix to replicate the factory Mopar Dip Primer. This paint applies super smooth and dries to perfect consistent satin sheen. The finish is very durable and seals the under body from moisture like only a proper topcoat will.

This color is the dark gray dip primer found on 1967-76 Mopar cars. Note: Cars built at the LA assembly plant were dipped in a black primer color. Available on the drop down menu below.

Apply over a gray epoxy primer of your choice. (Black under the LA plant black dip primer). SPI epoxy is an excellent choice that has etching properties as well as chromates for improved corrosion resistance. Instructions are included.

Sold in a 1 gallon kit that mixes 3qts. color with 1 qt. activator.

Matched primer colors are also available if you wish to add these overspray effects to your underbody.

$219 for 1 gallon Dip Gray kit.

Price: $219.00
Add to cart

« Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Next »

 


| home | about | restorations | shop tour | online store |
| tech board | rick's rides | testimonials | faq | news | resto links | contact |