Products and Component Restoration

Home » Reproduction Parts & Specialty Coatings » Interior & Upholstery

 Checkout

1971-74 B-body A/C Heater Box Gasket Set
1971-74 B-body A/C Heater Box Gasket Set

Details 

Reverse engineered, laser cut foams and seals required to restore the deteriorated foams in the A/C heater box of your 1971-74 B body.

All internal insulations, door foam, caulk, etc. Even the mat faced insulation piece that gets glued onto the back of the box and the thick charcoal foam piece that seals the front outlet to the dash/defrost duct. Basic instructions and pictures are included.

Manufactured by Detroit Muscle Technologies.

Price: $65.00
Add to cart

1971-74 B-body NON A/C Heater Box Gasket Set
1971-74 B-body NON A/C Heater Box Gasket Set

Details 

Reverse engineered, laser cut foams and sealing caulk required to restore the deteriorated foams in the non-air heater box of your 71-74 B body.

Manufactured by Detroit Muscle Technologies.

Also see our floor diffuser ductboard reproduction part available for this application.

Price: $39.00
Add to cart

6-way Seat Brackets
Previous1 of 4Next
6-way Seat Brackets

Details 

Nice accurate reproduction of E-body 6-way seat brackets. Stud mounting plates with 2 screws, 4 correct nuts & 2 thick spacer washers are included.

Stud mounting plates, nuts, correct steel material spacer washers and under floor braces are available separately as well. Use drop-down menu to select desired items for purchase.

Complete Kit is $248.40

Separate Parts: Under floor braces $195; Threaded stud plates $25; Thick spacer washers $18/pr.; captive tooth washer nuts & plate screws $10.40.

:
Price: $248.40
Add to cart

Firewall Insulation Nails
Firewall Insulation Nails

Details 

Correct shape & appearance reproduction black plastic nail fasteners used for fastening most Chrysler car firewall insuation pads. Sold in package of 10.
Price: $20.00
Add to cart

Headliner Bow Pocket Clips
Headliner Bow Pocket Clips

Details 

Set of 10 headliner bow pocket clips as used on 1969-70 B-body and 1970 E-body. These clips slide into rectangular cut outs on the roof sides. The headliner bow rests in the pocket of the clip.
Price: $35.00
Add to cart

Headliner Rear Bow Retainer Wires
Headliner Rear Bow Retainer Wires

Details 

Nice reproduction of the wires used to retain the rear headliner bow. Made from correct diameter spring tempered stainless steel. (Originals were zinc plated steel).

The arrow shaped end plugs into the rear roof crossmember and the other end hooks the rear bow. This keeps the bow in the correct position as the headlining material is pulled forward. Without these, the bows will "flop" over. The dome lamp location relative to the bows is also set by the rear bow position.

Available for various models, please inquire for your model's availability.

Price: $16.00
Add to cart

Heater Box Caulk
Heater Box Caulk

Details 

As used for sealing box halves to each other. Correct off-white color. Sold by the foot. Fits many applications. $.25/foot

NOTE: gasket kits include this material.

Price: $0.25
Add to cart

Heater Box Floor Duct Board
Heater Box Floor Duct Board

Details 

Heater box floor duct board for 70-4 E-body non-a/c cars. This part is an exact size reproduction made with original appearing black board material. It also has the correct pressed-in relief line where it bends as original.
Price: $14.00
Add to cart

Seat Nuts
Seat Nuts

Details 

Correct zinc dichromate plated toothed style captive washer nut as used for most Chrysler car seat mounting. These have the correct 1" diameter washer.

Price is each.

Price: $2.00
Add to cart

Seat Track Stud
Previous1 of 2Next
Seat Track Stud

Details 

Seat track stud. Also used for battery terminal head. Black oxide finish with square shoulder. 1 7/16" length from under the head to tip.
Price: $3.00
Add to cart

Trim Panel Clip Flat Style
Previous1 of 3Next
Trim Panel Clip Flat Style

Details 

Interior trim panel flat style clip.
Price: $1.00
Add to cart

Under Dash Shoddy Pad
Previous1 of 4Next
Under Dash Shoddy Pad

Details 

Under dash insulation/sound deadener pad made from correct appearing material and cut in exact shape as original.

Available for 1970-74 E-body, 1966-70 B-body, 1971-74 B-body, 1967-76 A-body cars. Select body type from drop down menu.

Manufactured by Detroit Muscle Technologies

:
Price: $24.00
Add to cart

« Previous | 1 | 2 | Next »

 


| home | about | restorations | shop tour | online store |
| tech board | rick's rides | testimonials | faq | news | resto links | contact |