Products and Component Restoration

Home » Reproduction Parts & Specialty Coatings » Body

 Checkout

1971 Cuda Fender Gill Gaskets
1971 Cuda Fender Gill Gaskets

Details 

Correct color, thickness and material composition gaskets for 1971 Cuda fender gills. Sold in a set of 8.
Price: $8.00
Add to cart

1972-74 Challenger Taillight Gasket Set
1972-74 Challenger Taillight Gasket Set

Details 

Thick, yellowish-white foam housing to body gaskets for your 1972-74 Challenger. Automotive spec, gray foam rubber blend, lense to housing gaskets. Like almost every Chrysler factory gasket installation, these gaskets were held in place by a very thin strip of black 3M weatherstrip adhesive (3M# 08008).
Price: $25.00
Add to cart

1972-76 Side Marker Gasket Set
1972-76 Side Marker Gasket Set

Details 

Correct yellowish/white closed cell foam material gasket set for the side marker lamps on all models of cars & trucks from 1972-76.

Manufactured by Detroit Muscle Technologies.

Price: $6.00
Add to cart

A&B Body Round Door Mirror Glass
A&B Body Round Door Mirror Glass

Details 

Replacement door mirror glass for A & B-body round style mirrors. Also available with vendor & date code etching.
:
Price: $21.00
Add to cart

Basic Exterior Paint Gasket Set
Previous1 of 2Next
Basic Exterior Paint Gasket Set

Details 

Reverse engineered, laser cut, OE style material BASIC exterior paint gasket set.

Contents
- Outer side marker gaskets
- Antenna gasket
- Mirror gasket (rallye)
- Door handle anti-abrasion gaskets
- Trunk lock gasket
- Fuel filler tube gasket
- Outer taillight & bezel gaskets
- Outer license plate light gaskets

SELECT MODEL FROM DROP DOWN MENU BELOW

Manufactured by Detroit Muscle Technologies

:
Price: $39.00
Add to cart

Bumper Bolt
Bumper Bolt

Details 

S/S capped bumper bolt. Includes flat washer, lock washer & hex nut.
Price: $1.50
Add to cart

Door Hinge Rebuild Kit
Door Hinge Rebuild Kit

Details 

This rebuilt kit includes new upper hinge pins & bushings and oversized pins for the lower hinge. New springs are included as well for a complete restoration of your door hinges.

The kit will repair door hinges on the following body types: 67-76 A-body, 66-70 B-body, 70-74 E-body.

:
Price: $44.00
Add to cart

Door Lock Rod Clip Set R&L
Previous1 of 2Next
Door Lock Rod Clip Set R&L

Details 

Plastic door lock rod clip set right & left hand.
Price: $2.00
Add to cart

Door Weatherstrip Clip Set
Door Weatherstrip Clip Set

Details 

Set of 50 special plastic clips used to retain door weatherstrips. Enough to do a pair of doors.
Price: $15.00
Add to cart

E-body Quarter to Trunk Floor Extension Gasket
E-body Quarter to Trunk Floor Extension Gasket

Details 

Correct material and thickness gasket for sealing either the fuel vapor tube plate or emissions stack to the quarter to trunk floor extension.
Price: $2.00
Add to cart

Fender Spin Washer Nut
Previous1 of 3Next
Fender Spin Washer Nut

Details 

Fender spin washer style nut. 5/16 thread size with 1 1/8" washer. Price is $2.00 each.

Fender stud as used at the fender bottom & top rear mount available as well. Price is $1.25

Make product selection using drop down menu.

:
Price: $2.00
Add to cart

Firewall Component Gasket
Firewall Component Gasket

Details 

Gasket made of correct thickness and material type.

As used on such components as emergency brake assembly to firewall, brake swing pedal hanger framework to firewall, 4-speed reinforcement strap to firewall, etc.

:
Price: $0.75
Add to cart

Large Flange Rivet
Large Flange Rivet

Details 

Special steel large flange pop rivet as used on front frame rail splash shields and 69 Roadrunner & Superbee air grabber hood air induction ductwork.

Also available in aluminum as used on Superbird and Daytona nose areas.

:
Price: $0.50
Add to cart

Mirror Threaded Insert
Mirror Threaded Insert

Details 

10-24 threaded steel insert as used to fasten door mirror and rear window louvers.

Requires use of a threaded insert installation tool. A low-buck alternative is to use a 10-24 hex headed screw with a flat washer and a hex nut. The screw is threaded into the insert with the hex nut threaded on the screw. While holding the screw to prevent it from turning, the hex nut is tightened to compress the threaded insert. The insert must be held tightly to the sheetmetal as the nut is tightened.

Price: $1.00
Add to cart

Push Retainer
Push Retainer

Details 

Push retainer as used on A-body hood hinges (4 required) and E-body trunk hinges (2 required).

Price is each.

Price: $1.00
Add to cart

« Previous | 1 | 2 | 3 | Next »

 


| home | about | restorations | shop tour | online store |
| tech board | rick's rides | testimonials | faq | news | resto links | contact |