Products and Component Restoration

Home » Reproduction Parts & Specialty Coatings » Interior & Upholstery

 Checkout
1966-70 B-body NON A/C Heater Box Gasket Set
1966-70 B-body NON A/C Heater Box Gasket Set
Reverse engineered, laser cut charcoal, neoprene and polyethylene foams required to restore a 66-70 B body heater box.

Manufactured by Detroit Muscle Technologies.

Included in kit:

- ALL laser cut charcoal foams for all door and panel seals just like OEM

- 1/2"W x 3/8"H Foam tape

- 3/4"W x 1/2"H Foam tape

- (2) White poly door bushings

- (3) White poly box stud seals

- Drivers side floor vent to cowl gasket

A heater box can be disassembled, cleaned, foams installed and reassembled in an afternoon.

I usually sand blast (or glass bead) the metal "doors" and all brackets. Wash the housing in hot soapy water with a scrub brush to clean out 30 years of movie tickets and leaves. Spray all the metal doors and brackets with a "metal look" quality paint (like Rustoleum Titanium). Then apply high temp spray adhesive to the door foams. Wait for the adhesive to "set up" for a couple minutes and then apply the foams to the doors. Assemble in reverse order and install your heater box and save yourself $300+ having it done!

 
 
Price: $35.00

 
« Previous | Next »







 


| home | about | restorations | shop tour | online store |
| tech board | rick's rides | testimonials | faq | news | resto links | contact |